SAR Rooftop Access Kit
01 Overview
SAR Rooftop Access Kit
The SAR Rooftop Access Kit was developed to take advantage of using either a single or twin rope safety system. It can be used as a vertical safety fall arrest on ladders, towers, trees etc. It can also be used as a work restraint or fall arrest system in rooftop areas where a single rope can be used to access an open edge or a twin rope system to prevent pendulum movement.There are no knots for the user to tie as this has been taken care of by either clipping the rope carabiner directly on to the anchor (EN795) or looping around a structure or girder then clipping back into the rope loop on the slider.
02 Key Features
A Kestrel 2 harness.
4 x Gater alloy screwgate carabiners
2 Oval screw gate steel carabiners
2 Rockers
A SAR equipment holdall 35L
11mm low stretch rope to required length
4 x rope protectors
2 x 10cm twin eye sling
Each kit contains all the items shown in the picture above with either 25 meters or 50m of rope.
As a work restraint/positioning system it will conform to E358 and as a vertical back up system EN353-2. Each individual item in the kit conforms to the correct and are compatible for this use. If a harness is not required because the client already has one, it can be taken out as the kit can be used with any of the SAR full body harnesses or sit harness with the chest harness linked.
This system must be used from the front attachment only
Training is highly recommended for this system so that the user understands its many uses.
SAR Work Kits
SAR Rooftop Access Kit